...Timing belt drive systems come with a variety of tensioning methods and components. In the past, engines used a manual tensioner (or eccentric pulley) for the drives, which had to be installed and then locked in place. Over time the belt tension would change as there is no self-adjustment...
...E2/TT005 v1.0 › 12/2014 › Pag. 1/1 Tensioner T43133 has a very particular installation process , described below . Removing the load pin too early influences the working area of the tensioner dramatically and leads to premature failure with engine damage as a consequence. T431...
...Tensioner T43133 has a very particular installation process , described below . Removing the load pin too early influences the working area of the tensioner dramatically and leads to premature failure with engine damage as a consequence. T43133 Hyundai, Kia 1.5, 2.0 & 2.2 Diesel Fig. 1...
...The idler T42140 ( Fig.1 and Fig.2) is used in many engines but the threaded engine installation hole may differ in size. The Gates idler is supplied with a M8 bolt that has a 10mm shaft and a washer. Some applications require an M10 . If so the original bolt can be re -used...
...Technical Bulletin 012 Copyright © 2006 Gates Corporation Page 1 of 6 # 012 31/03/2006 GATES REFERENCE : MAKE : MODEL : MOTOR : MOTOR CODE : K015543XS, K025543XS and K015559XS AUDI / SEAT / SKODA / VOLKSWAGEN A3, Cordoba, Ibiza, Inca, Leon, Toledo, Octavia, Bora, Cadd...
...In order to facilitate finding the related Technical Bulletin and the correct Tool Kit needed to install our PowerGrip® belts, we have started to add some information to the labels of these products. To identify available technical information we use the icon The spanner icon is used fo...
...TT014 v1.0 › 09/2016 › Pag. 1/1 The manufacturers reserve the right to amend details where necessary. © Gates Corporation 2017 TT017v1.0 11/2017 Pag. 1/1 0094-64003 Heavy Duty tensioner T38667 Mercedes 10.7 – 12.8...
...Join Bill Mortimore as he walks you through installing a Micro-V Stretch Fit Belt, manufactured by the Gates Corporation. You cannot replace one of these belts with a standard v ribbed belt. Micro-V Stretch Fit Belts are made with TwistLock™ Technology - Advanced process adhering cord an...
...Micro-V XF belts – PJ profile AUDI / SEAT / VOLKSWAGEN / MERCEDES MULTIPLE Micro-V® XF belts – PJ profile For many years the PJ profile was only used for industrial applications, especially in the “white goods” sector, as drive belts for washing\ ma...
...On certain Opel/Vauxhall engines ( codes: A14NEL, A14NET, A14XEL, A14XER) the belts may have 5 or 6 ribs while the pulleys may have 5 or 6 grooves . It depends on the manufacturing date of the car . Gates recommends replacement of a 5 groove OAP (Fig.1 left side) w ith the 6- groov...