...E2/TT00 9 v1.0 › 12 /2014 › Pag. 1/1 On certain Opel/Vauxhall engines ( codes: A14NEL, A14NET, A14XEL, A14XER) the belts may have 5 or 6 ribs while the pulleys may have 5 or 6 grooves . It depends on the manufacturing date of the car . Gates recommends replacement of a 5 groo...
...See installation instructions provided in this kit. Crankshaft must be rotated two turns COUNTERCLOCKWISE with locking pin in tensioner and attachment bolt loose.BULLETIN PA007-11› PART NUMBER: TCK312 TCKWP312 T312› MAKE: Honda› MODEL: Civic› YEAR: 2001-2005› ENGINE: 1.7LINST...
...E2/TT010 v1.0 › 12 /2014 › Pag. 1/1 Tensioners T43016 (Fig. 2) and T43017 (Fig. 1) are used in combination with Timing Belt 5491XS. Although both tensioners look identical at first sight, they are not interchangeable. The difference is to be found in the orientation of the a...
...The Gates Technical Team has recognized these applications for potentially difficult timing belt installations. It is also common for steps in the installation procedure to be overlooked resulting in lost time and warranty returns. Industry publications as well as professional technician f...
...AUTOMOTIVE PASSENGER CAR SYNCHRONOUS BELT DRIVE SYSTEM Technical Service Bulletin TIMING BELT SETUP FOR 1999-2012 SAAB AND SUBARU 2.0L/2.2L/2.5L APPLICATIONS WITH MANUAL TRANSMISSION Industry concern has been raised regarding the Subaru hydraulic tensioner (Gates T43138) applications li...
...AUTOMOTIVE PASSENGER CAR ACCESSORY BELT DRIVE SYSTEM Technical Service Bulletin ACCESSORY BELT DRIVE SYSTEM HONDA BULLETIN PA010-12› PART NUMBER: 38332› MAKE: Honda› MODEL: Accord Odyssey Pilot Ridge line› YEAR: 2003-2007› ENGINE: 3.0L 3.5LWith over 100 years of experience,...
...BACrank A.C.W.P.Alt.Break-in Procedure: Recommended drive cycle is no less than 20 minutes before checking and setting final drive tension. ACCESSORY BELT DRIVE NOISEThe Original Equipment Manufacturer has identified a possible accessory drive belt squeal on some 2007 Toyota Yaris vehicles...
...Timing belt drive systems come with a variety of tensioning methods and components. In the past, engines used a manual tensioner (or eccentric pulley) for the drives, which had to be installed and then locked in place. Over time the belt tension would change as there is no self-adjustment...
...AUTOMOTIVE PASSENGER CAR ACCESSORY BELT DRIVE SYSTEM Tech Tip The two part numbers seen on the image below come on every belt sleeve. These numbers give important data with regards to the “effective” length of the belt. The effective length is a measurement of the entire length of the...
...AUTOMOTIVE PASSENGER CAR COOLING SYSTEM Tech TipF lushing:Over time, coolant in the cooling system can break down resulting in the need to service the system. The protectants in many of today's coolants become depleted and weak leading to corrosion, rust and scale. When this depletion tak...