menu

Search 4,455 docs, articles & videos from the world’s leading Automotive part manufacturers

  

3838 results

...BMW 3 / 5 / 7 series, X5, Z3, Z4 CLTB 0008 SELF-ADJUST CLUTCH FITTING GUIDE Concerns The vehicles listed above are fitted with self-adjusting clutches. When you remove the new replacement clutch from it’s box, please check that the 3 self-adjusting springs are still in a compressed...

...Renault Avantime, Espace, Laguna, Mégane, Vel Satis SELF-ADJUST CLUTCH FITTING GUIDE Concerns Certain models of the vehicles listed above may be fitted with a Self-Adjust Clutch. Before fitting a replacement self-adjusting clutch, ensure the self-adjust springs remain compressed (1)...

...Vauxhall / Opel Corsa 1.0i, 1.2i with ‘Easytronic’ gearbox OPTIONAL ADAPTABLE CLUTCH KIT TO REPLACE SELF ADJUSTING UNIT Concerns The self adjusting clutch (SAC) fitted to the models above (HK2097) is extremely susceptible to handling damage prior to fitment, specifically ‘self ad...

...Fiat Ducato 2.3 TD 2006 - Clutch Kit HK2194 HK2194 TRANSPORT SPACER Concerns; Failure to remove the transport spacer before refitting the gearbox to the back of the engine can result in major component failure. Method; With the transit spacer in place fit the cover assembly and driven...

...Dual Mass Flywheel Conversion Suitability Ford Transit 2.4Di Fitted with replacement solid flywheel clutch system IMPORTANT! Please ensure that the vehicle is suitable for a HKF1001 4-in-1 DMF replacement by following the application limitations governed below HKF1001 is NOT suitable f...

...Rover Group Mini 1.3 injection THE IMPORTANCE OF FITTING THE CORRECT CLUTCH KIT HK6604 TO MINI 1.3injection models. Concerns; We have had several instances now where the incorrect clutch cover/clutch kit assembly has been fitted to the 1.3i Mini. The incorrect kit part numbers being HK...

...Alternative Replacement Clutch Design To Fit In Place Of Self Adjusting Types The alternative design clutch kits below have been developed to replace the original self adjusting types above. Although these clutches are different in design, they will fit perfectly in place of the original...

...Moveable Release Bearing Face Various BMW 1, 3 and 5 Series Concerns; We have been receiving enquiries about the release bearings rotating clutch interface appearing to be loose/faulty. Moveable/Loose Bearing Face Method; Please be aware that the front rotating clutch interface w...

...Various BMW & VAG Group Vehicles Ball Race Release Bearings Which Appear To Have A Plastic Contact Face Concerns; We have had several instances now of garages querying if the plastic face is just for protection and should it be removed prior to fitting Method; Under no circumstances sho...

...Cover Assemblies “AS” Type Displaced Release Lever Struts recommendations should be followed, failure to observe them could result in a strut becoming dislodged.After the clutch is fitted to the flywheel, under no circumstances must a release lever, or the release lever plate if fitte...



...[Previous 10 pages] ... 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 ...[Next 10 of 384 pages] ...