190 results for "Ac not cold"

• 
• Type

  Technical Bulletin

• Renault Espace (JE) - Temporary failure of air conditioning, heating fan

• May 05

• Hella Ireland (1757)
• 

...enault EspAc e (JE) Temporary failure of the air conditioning / heating fan If in the case of the above-mentioned vehicles with the fabrication numbers listed below the air conditioning/heating fan should fail temporarily, a faulty cable connection on the relay carrier could be the cause...

• 
• Type

  Technical Bulletin

• Rover 45 - Condenser fan not working

• Dec 04

• Hella Ireland (1757)
• 

...efore replAc ing the control unit, however, the power supply to the condenser fan should be checked by using a circuit diagram. Bulletin...

• 
• Type

  Technical Bulletin

• Smart 451 - Short circuit in coolant shutoff valve

• Apr 15

• Hella Ireland (1757)
• 

...icle manufAc turer is already on top of the problem and has inspected the vehicles and deAc tivated the valves as part of a recall campaign. For various reasons, however, it can be assumed that not all vehicles have been inspected and repaired. Please observe this bulletin, especially in...

• 
• Type

  Technical Bulletin

• Mercedes M271 engine timing chain noises and testing

• Feb 15

• febi (179)
• 

...l and replAc e the appropriate components.Register now for the official febi bilstein newsletter and receive the latest technical information automatically by email! Further information may be obtained at: www.febi.comSimply ask for spare parts by febi bilstein. The complete range can be fo...

• 
• Type

  Tech Tip

• Fiat Ducato 2.3D timing belt guide

• Sep 15

• Dayco (52)
• 

...- be replAc ed at the same time. This step-by-step technical guide will help technicians through the process, to avoid complications and ensure a first-rate job. As with all primary drive system jobs, the work should be undertaken when the engine is cold, so ideally the vehicle will not h...

• 
• Type

  Tech Tip

• Petrol Injection systems explained

• Oct 15

• Autoinform (109) Contact
• 

...due to a lAc k of knowledge or confidence? Whatever the reason, it was clear that developments in petrol injection systems had evolved to such an extent, that a genuine fear or reluctance to take on such work demanded a redress. Around 80% of our garage's work related to diagnosis and...

• 
• Type

  Technical Bulletin

• Tensioner/kit installation on PSA diesel engines

• Jan 12

• Gates (127) Contact
• 

...belt to trAc k, leading to engine failure. Common fitting error : We've found several c ases where the tensioner pulley was not positioned correctly over the mounting stud (Fig. 1). Fig. 1 Fig. 2 Fig. 3 Tensioner/kit installation on PSA d...

• 
• Type

  Technical Bulletin

• VAG 2.5 V6 TDI – Timing Belt set-up

• Mar 11

• Gates (127) Contact
• 

...running vAc uum pump (hard points) will put extra wear on the belt, possibly leading to premature failure. Fig . 1 Fig. 2 Recommendations (Engine has to be cold!!!) It is vital that the correct installation tools (to be found in GAT4450) are used in order to fit the belt s...

• 
• Type

  Technical Bulletin

• PowerGrip belt/kit installation on Ford Puma 1.7

• Feb 15

• Gates (127) Contact
• 

...“kick bAc k” and compress the spring too far , leading to very low belt tension, causing tooth jump and/or belt damage . Procedure - engine has to be cold and at TDC position - insert crankshaft pin and camshaft setting bar ( use Gates tool kit GAT4404C) - loosen camsha...

• 
• Type

  Technical Bulletin

• Timing belt/kit installation on VAG 1.4 & 1.6 16V

• Mar 10

• Gates (127) Contact
• 

...e visual Ac cess is quite limited when the engine is installed in the vehicle. As a result of all this, an error can easily be made. It is c lear an incorrect position of the locat ing lug (Fig. 2, 3 and 4) will lead to an incorrect belt tension or to the fAc t the belt cannot be ten...