menu

Search 4,528 docs, articles & videos from the world’s leading Automotive part manufacturers

  

180 results for "Ac not cold"

...of it in Ac cordance with regulations. ✔ Check the used cooling water for contamination and residue. ✔ When removing the old thermostat, note its precise location and position. ✔ The electrical connection of map-controlled thermostats must not be removed or dismantled. Removing...

...dest to trAc k down and fix. If you can’t observe the fault, you are only guessing what might be going wrong. TEXA’s Dave Gordon recounts two recent situations where he encountered a sporadic fault and the steps that were needed to come to a successful diagnosis and repair. The first...

...to be replAc ed. If the brake pads or the brake discs have also been damaged in the process, renewal of these components is also recommended....

...NO. ReplAc ement for Various vehicles with following engines 1.5 ... 2.5 dCi/DTi/TDi/TD/CDTi 16V Assignment and usage, refer to the eAc h case current catalogues, TecDoc CD respectively systems based on TecDoc. 7.22818.59.0 7.22818.06.0/ .17.0/ .29.0/ .32.0/ .34.0/ .39.0/ .41.0/ .51.0...

...ps on ReplAc ing Timing Belts • Detailed instructions for a CT884 K1 in a 1997 Opel Omega B (25_, 26_, 27_) 2.5 L V6 with engine code X25XE • ContiTech is demonstrating how mistakes can be prevented when replAc ing belts When the timing belt is replAc ed, serious mistakes are often ma...

...The manufAc turer recommends changing the timing belt in the case of a timing belt and fuel injection pump every 120,000 km. In addition, the timing belt and fuel injection pump should be checked every 30,000 km. Tip: The multi V-belt ought to be changed at the same time as the timing b...

...BULLETIN Ac SYSTEM COMPONENTS©Nissens A/S, Ormhøjgårdvej 9, 8700 Horsens, Denmark. For further technical and contAc t information visit our website www.nissens.com. The material and its contents are provided without warranty of any kind, and by publishing of it, wedisclaim any liabili...

...being replAc ed due to a failure that is in reality due to a fuse overload. This fault only occurs during colder temperatures when the windscreen wiper freezes to the windscreen. When the windscreen wiper is Ac tivated, the current consumed by the wiper motor increases to such a great extent...

...The manufAc turer recommends changing the - timing belt every 160,000 km/10 years - ancillary unit belt (ELAST) every 160,000 km/10 years The labor time is 2.8 hours. The labor time for the ancillary unit belt is 0.6 hours. Tip: The multi V-belt must be changed at the same time as the...

...medy: ReplAc ement is recommended with new plug of the same heat rangeWorn-out Spark Plug• Appearance: Melting (or partial melting) of the ground and/or central electrode• Cause: Spark plug too hot, air fuel mixture excessively lean, incorrect ignition advance, defective exhaust re-c...



3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ...[Next 10 of 18 pages] ...
footerlogo
popup