133 results found for Blue Print

• 
• Type

  Technical Bulletin

• Mitsubishi Mitsubishi Tensioner Pin Set ADC45501

• May 11

• Blue Print (161) Contact
• 

...Product Information: ADC45501 Tensioner Pin Set Applications: Various Mitsubishi engines (also fitted to some Hyundai and Proton models) Blue Print’s ‘Tensioner Pin Set’ ADC45501 is a three piece kit that is required to  allow the correct setting of the timing belt...

• 
• Type

  Technical Bulletin

• Mitsubishi L200 Rear Leaf Spring Replacement

• May 07

• Blue Print (161) Contact
• 

...INF105 Mitsubishi L200 Rear Leaf Spring Replacement Application – Rear Leaf Spring Part number ADC48804. We have now changed the Rear Leaf Spring application for the Mitsubishi L200 K74 model to “Refer”. This is because this model can be fitted with a variety of diff...

• 
• Type

  Technical Bulletin

• Mitsubishi L200 Cab Type Identification

• Nov 11

• Blue Print (161) Contact
• 

...INF131 Mitsubishi L200 CabType Identification Single Cab - 2 Doors Driver and Passenger Seats Double Cab - 4 Doors Driver and Passenger Seats and 1 bench seat behind Club Cab - 2 Doors Driver and Passenger Seats and 1 bench seat behind...

• 
• Type

  Technical Bulletin

• Mitsubishi Ignition Coil Replacement

• Jun 05

• Blue Print (161) Contact
• 

...INF088 Mitsubishi Ignition Coil Replacement It is the experience of Blue Print that the ignition coils fitted on several Mitsubishi vehicle applications (including the Carisma, Colt, Galant, Shogun, Space Star, Space Wagon and FTO) are prone to partial or full failure during their service...

• 
• Type

  Technical Bulletin

• Mitsubishi FTO-Galant Idle Speed Control Valve-Stepper Motor

• Feb 07

• Blue Print (161) Contact
• 

...INF096 Mitsubishi FTO-Galant Idle Speed Control Valve-Stepper Motor Product Focus –Idle Speed Control Valve (Stepper Motor) ADC47430 Mitsubishi FTO 2.0 & Galant 2.5 V6 models It is our experience that the Idle Speed Control Valve (Stepper Motor) commonly fails on the Imported...

• 
• Type

  Technical Bulletin

• Mitsubishi FTO Crankshaft Pulley Replacement

• May 07

• Blue Print (161) Contact
• 

...INF104 Mitsubishi FTO Crankshaft Pulley Replacement ADC46104C Crank Shaft Pulley Subject - Product Information Vehicle – Mitsubishi FTO 2.0 (DE3A) We have been made aware that the Crankshaft pulley fitted on the Import Mitsubishi FTO 2.0 model is prone to partial or full failure du...

• 
• Type

  Technical Bulletin

• Mitsubishi Colt and SMART Forfour Parking Brake Tempoarily Seized

• Feb 21

• Blue Print (161) Contact
• 

...Mitsubishi Colt and SMART Forfour Parking Brake Tempoarily Seized Problem After applying the parking brake the rear brake caliper becomes seized in operation, which could take 5-10 minutes to move freely again. This problem can affect either side separately or both sides together....

• 
• Type

  Technical Bulletin

• Mitsubishi Clutch Replacment - Mainshaft Flywheel (Spigot) Bearing Failure

• May 06

• Blue Print (161) Contact
• 

...We have encountered several cases of flywheel (spigot) bearing failure on some Mitsubishi models. The flywheel should be carefully checked or replaced when installing a new clutch assembly. The following points should be noted during routine clutch replacements: A seized flywheel bearing m...

• 
• Type

  Tech Tip

• Mitsubishi AYC/ACD system

• Aug 13

• Blue Print (161) Contact
• 

...Mitsubishi AYC/ACD system Written by Jim gilmour Blue Print’s Technical Consultant. electronic stability programmes by any other name have been around for over a decade and have contributed greatly to vehicle safety. Much has been written about them, and for the most part, their op...

• 
• Type

  Installation Instructions

• Mini Wheel Bearing Replacement

• Feb 17

• Blue Print (161) Contact
• 

...Mini Wheel Bearing Replacement In this video we look at a BMW Mini with multiple warning lamps on and a grinding noise coming from the front of the vehicle. A diagnosis and replacement is then carried out to the left hand front wheel bearing and ABS sensor....