menu

Search 3,939 docs, articles & videos from the world’s leading Automotive part manufacturers

  

84 results found for MAHLE

...KX191/1D and KX80D—diffi culty starting after installing the fi lter? Tips for correct installation. The two fuel fi lter models from MAHLE are in use in several million vehicles around the world. When correctly installed, they are very reliable and provide optimal fi lter performan...

...Lack of performance or whistling noises after a turbocharger replacement? The truth is in the gasket. If you experience power loss or whistling noises immediately after replacing a turbocharger, the new part often comes under suspicion fi rst. The real culprit, however, is often els...

...If the engine does not start or fuel leaks occur following a filter change, the cause is often to be found in the fi lter being incorrectly fitted. IMPORTANT: THE CORRECT FITTING ORDER OF THE SEAL AND FILTER ELEMENT TO THE HOUSING AND COVER. If fitted the wrong way round, leaks will...

...Oil pressure problems after replacing filter MAHLE oil filter insert OX339/2D: oil pressure problems after replacing fi lter Technical Messenger After replacing fi lter reference OX339/2D, it is possible that the oil pressure indicator lights up despite an oil pressure check not sho...

...Not fully sealed? Installing coolant thermostats correctly The coolant thermostat performs numerous important functions in a vehicle. As a result, it is advisable to re place the thermostat promptly in the event of a fault. Time and again, thermostats are returned to MAHLE under com...

...MAHLE LX 1780/3—anti-rotation protection in use Every air filter element exhibits greater fl ow resistance around the pleated paper joint compared with other areas, as it acts as a seal. If the air mass fl ow meter is in close proximity to the filter element, metering of the air f...

...MAHLE LX 1025 air filter element—designed for two housing heights MAHLE LX 1025 air filter element has been approved by vehicle manufacturers for use in two different applications with differing housing heights of 505.5 mm and 525 mm. In order for the air filter element to be in...

...In recent months, there has been feedback from workshops that leaks arise around the connection pipe or banjo union after a filter change. The risk: escaping fuel may contaminate the braking system under adverse circumstances and thus reduce braking effectiveness. Since a 100% leak t...

...Installing the water level sensor in diesel fuel filters KL418, KL431, KL581 Some fuel fi lters with a plastic housing are equipped with an interface for fi tting a water level sensor. This sensor is not installed in all vehicles. When the fi lter is new the threaded mounting hole h...

...Cylinder liners with cylinder liner ring (fire ring)—information about function and assembly In engines subjected to heavy loads, many engine manufacturers install cylinder liners with a fire ring. This is located in the upper end of the liner and seals in the direction of the cy...



1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9