menu

Search 4,616 docs, articles & videos from the world’s leading Automotive part manufacturers

  

4545 results

...Additives can be harmful to AC lubricants46 February/March 2025 AUTOBIZ T he thin oil film between pistons and cylinders ensures their smooth operation, and proper refrigerant sealing. Furthermore, the lubricant works as a cooling agent, extracting heat from the compressor and pr...

...40 February/March 2025 AUTOBIZ W ith the vehicle on the lift, open the bonnet, remove the engine cover, air filter assembly, disconnect the battery terminals, remove the battery, the engine control unit from its bracket and then the battery carrier. Unclip the wiring looms as re...

...Technical Messenger mahle-aftermarket.com Whether the coolant flows vertically (downdraft) or horizontally (crossflow) has no impact on the effectiveness of the cooling.Advantages of mechanically joined radiatorsDue to the smaller distance between the cooling fins, mechanically joined radi...

  • img
  • Type

    Technical Bulletin

  • Hyundai/KIA Tensioner Assembly for Auxiliary Drive Belt
  • Jan 25

  • Blue Print (210) Contact
  • PDF

...Tensioner Assembly for Auxiliary Drive Belt Function Attached to the starter-generator, this tensioner assembly is an integral component of the ISG (idle, stop, and go) system on the vehicles listed. The ISG system is designed to lower emissions and improve fuel economy by switching the...

...Mahle Technical Messenger Issue no. 01/2025 mahle-aftermarket.com breakage of the rotor shaft (see Fig. 2). Coked residue in the oil return line leading to the oil pan is a clear indication of this damage scenario (see Fig. 3). If a vehicle does not deliver full power even after a new...

  • img
  • Type

    Technical Bulletin

  • Toyota Echo/Yaris 1 with Uneven Tyre Wear
  • Jan 25

  • Blue Print (210) Contact
  • PDF

...Blue Print ProTip www.blue-print.comwww.blue-print.com EN Ferdinand Bilstein GmbH + Co. KG Wilhelmstr. 47 | 58256 Ennepetal | Germany | Tel. +49 2333 911-0 | www.bilsteingroup.comPRO TIPS Technical data can be subject to change Problem Uneven tyre wear and inconsistent vehicle handlin...

...Technical data can be subject to change EN Coolant Expansion Tank Problem Coolant loss and engine misfiring but only when the engine is at operating temperature and under load. Engine management lamp illuminated. Cause Due to thermal stress and engine drive cycles with dramatic changes in...

...Watch and Work: Handling Electrically Adjustable Water Pumps Electrically adjustable water pumps, such as the WP6098 and WP6124 units for Audi, Seat, Skoda and VW models, can be troublesome. In this Watch and Work video, we’ve compiled some common fault types together with tips on...

...MAHLE Technical Messenger 12 | 2024 Alternator damage due to oil ingress To avoid costly follow-up damage, it’s crucial to investigate thoroughly and pinpoint the root cause before replacing a faulty generator. One of the most common causes of generator failure is oil intrusion. Be...

...When Eccentric Cam on Tensioner Pulley Fractures on the CT1168 - Avoiding Fitting Errors When Eccentric Cam on Tensioner Pulley Fractures on the CT1168 - Avoiding Fitting Errors Has the eccentric cam on the tensioner pulley ever fractured while you’ve been tensioning our CT1168 timin...



1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 ...[Next 10 of 455 pages] ...