4051 results

• 
• Type

  Tech Tip

• LuK Clutch Academy - Mini One (R52)

• Jun 21

• REPXPERT (27)
• 

...LuK Clutch Academy - Mini One (R52) REPXPERT Alistair Mason, is replacing the clutch assembly in a 2008 Mini One (R52), that has covered more than 72,000 miles. The customer had reported that the clutch was “slipping” under load, and a short road test confirmed the clutch was at the e...

• 
• Type

  Tech Tip

• Continental timing belt guide - Fiat Doblo 1.6D Multijet

• Jun 21

• Contitech (157)
• 

...Continental timing belt guide - Fiat Doblò 1.6D Multijet Continental timing belt guide - Fiat Doblo 1.6D Multijet Fiat 1.6 D Multijet diesel engines are installed in many vehicles. To ensure that the belt change operation goes smoothly, ContiTech experts provide a step-by-step explanati...

• 
• Type

  Technical Bulletin

• Propshaft balancing

• Jun 21

• PicoScope (102)
• 

...Steve Smith Steve goes through the propshaft balancing feature in PicoDiagnostic, showing you how the software guides you through the process and helps you balance the propshaft correctly....

• 
• Type

  Technical Bulletin

• Removing and installing a GDI high pressure injection pump

• Jun 21

• Bosch (15)
• 

...This video explains how to remove and install a Bosch GDI high pressure injection pump. More information: http://www.boschaftermarket.com  ...

• 
• Type

  Technical Bulletin

• Leak from Oil Filter Housing - VAG 1.6 & 2.0 TDi

• Jun 21

• Blue Print (202) Contact
• 

...Oil Filter, Oil Filter Cap, Oil Filter Housing Problem Oil leaking from the engine oil filter housing. Cause The oil filter cap and housing, which is made from a hard and durable thermoplastic, becomes weak or damaged following repeated unscrewing and tightening. This is most likely...

• 
• Type

  Component Description

• Installing a viscous fan or clutch

• Jun 21

• MAHLE (140)
• 

...Technical Messenger 03|2021 Did your Visco® fan or clutch get damaged during transport? Before installing Visco® fans and clutches, it is essential to check if the components have been damaged in transit. Visco® clutch housings contain a reservoir chamber that is filled with a prede...

• 
• Type

  Technical Bulletin

• Oil quantity distribution in air conditioning circuits

• Jun 21

• MAHLE (140)
• 

...Technical MessengerFinding out the correct oil quantity is absolutely key to avoiding consequential damage when replacing an air conditioning compressor. Always flush the refrigerant circuit As a general rule, the refrigerant circuit must always be flushed if an air conditioning compressor...

• 
• Type

  Technical Bulletin

• Jacking procedure for a Tesla Model 3

• May 21

• febi (163)
• 

...PROTIPSTechnical data can be subject to change Ferdinand Bilstein UK LtdSeymour Link Road | Woodthorpe | Mastin Moor | Chesterfield | S43 3FG | ww.bilsteingroup.comENTo Fit: Tesla Model 3/S/XAttention! When performing maintenance (which requires the vehicle to be raised from the ground) o...

• 
• Type

  Technical Bulletin

• Jacking procedure for a Tesla Model S and Model X

• May 21

• febi (163)
• 

...PROTIPSTechnical data can be subject to change Ferdinand Bilstein UK Ltd Seymour Link Road | Woodthorpe | MAstin Moor | Chesterfield | S43 3FG | | www.bilsteingroup.comENTo Fit: Tesla Model 3/S/XAttention! When performing maintenance (which requires the vehicle to be raised from the groun...

• 
• Type

  Technical Bulletin

• Installing viscous fans and clutches

• May 21

• MAHLE (140)
• 

...Technical MessengerBefore installing Visco® fans and clutches, it is es-sential to ensure that the components have been properly stored and transported. There are two types of radiator fan: fans with an electric motor and Visco® fans driven directly from the internal combustion engine...